News:

Prehistoric Soul - 2024

We are pleased to announce that the forum has been successfully updated to the latest version. While the process has been gradual and some posts were unfortunately lost, the forum is now operating on a stable platform. Over the coming weeks, we will continue to make periodic updates, including adjustments to colors, advertisements, and other features. In the meantime, we encourage you to catch up on old posts or contribute new ones. Thank you for your patience and continued support.

Main Menu

Crimps, Crimpers and Crimping

Started by BackBayMan, February 24, 2015, 06:27:16 AM

Previous topic - Next topic

BackBayMan

Ok all of you crimping gurus, what's the hot ticket?

I started with a set of point to cup crimpers, round brass sleeves, and 90lb 7 strand wire. They worked, but what a pain in the butt!

Now I want to start doing my own Ghost Leaders with 80lb+ fluorocarbon in addition to heavier wire leaders for bigger toothy critters ;D

So what's your favorite combo of crimps, crimpers and techniques? I know you can over crimp fluorocarbon/mono, but does anybody have a bomb proof set up? What about suppliers and quality? Seems like there's a big difference in price between my local tackle shop and what's available online :(
Anybody have an emergency beer?

Eric H

When I first started crimping I wasn't too knowledgable about it.

I picked up a pair of point to cup crimpers, round sleeves and 135lb. 7 strand coated cable.

I found that its just about impossible to keep the wires from crossing when doing a fair to tight loop with the round sleeves.

Did more research and found that the double barrel sleeves would eliminate this problem. Found that cup to cup crimpers would be necessary for the double barrels so picked up those crimpers as well.

Nailed it, found that this is the way to go and im sure most would agree.

I made the switch from 7strand to to AFW's 49 strand. The suff is so much softer and limper. Quality stuff as well.

Ill run the 480lb. in 2 foot leaders or 6 ft. depending if im casting off the ground or wading out casting.

Ive had no issues, caught large bats, leos and a 7gill. Ive put even more pressure on the crimped leaders in the backyard hanging weights from them.

I like AFW's website, when you order wire from them they will tell you what size crimps to get. Other than that, rule of thumb is to get a sleeve that fits snug to your wire.



As far as crimping mono, I don't.. I can tie up to 130 mono so didn't see why  I should crimp it. If you do decide to crimp it, use aluminum sleeves.